-
E-mail
info@renhesci.com
-
Phone
13918294437
-
Address
1st Floor, Building 25, No. 69 Guiqing Road, Xuhui District, Shanghai
Product Categories
Shanghai Renhe Scientific Instrument Co., Ltd
Erlab fume hood XLS 483
NegotiableUpdate on 08/01
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
CaptairflexiTM is an independent instrument that can be installed at any location in the laboratory to provide safety protection for chemists. As they do not need to exhaust indoor air, even if multiple Captairs are installed, there is no need to worry about the supply of fresh air in the laboratory. Captair is easy to move and can be installed on a roller cart (optional).
Product Details
Registered filter loop system!
come fromYilabo® Revolutionary research and development achievements in the R&D laboratory:A set of multi-layer filtration components can be achieved by vertically placing equally sized filtration systems and devices (high-efficiency activated carbon filters and HEPA filters), making it easy to adjust the filters to meet the requirements of various chemical experiments in the laboratory. The vertically connected filter assembly adopts foam sealing technology to ensure its tightness.
A single fume hood can be transformed into a more suitable mode in the future with the change of chemical operations!
XLS 483 fume hoodAdvantages of
XLS 483 fume hoodAdvantages of
Computerized control panel!
captair®flexTMAll control and security information is centralized in a computerized control panel, including:
1）Fan and air flow control will issue audible and visual alarms when the air flow is imbalanced.
2）Timer, every60An alarm will be issued within an hour to remind users to check the saturation status of the filter.
3）Optional filter automatic alarm（MelecodeTMS）,Suitable for organic operations.
4）Maintenance and maintenance program settings.
captair®flexTMAll control and security information is centralized in a computerized control panel, including:
1）Fan and air flow control will issue audible and visual alarms when the air flow is imbalanced.
2）Timer, every60An alarm will be issued within an hour to remind users to check the saturation status of the filter.
3）Optional filter automatic alarm（MelecodeTMS）,Suitable for organic operations.
4）Maintenance and maintenance program settings.
Filter saturation detection port!
Color beam tubes can be used to sample the air at the air outlet at the detection port to detect the saturation condition of the filter.
Fluorescent lamp!
18W，500lux,IP 68
High quality fluorescent tubes can be equipped according to the size of the fume hood1-3Root light tube. Provide high-quality lighting for chemical operations prepared for safety.
Anemometer, capable of monitoring surface wind speed!
The monitoring device for displaying surface wind speed must achieve a surface wind speed of0.4-0.6m/s(Compliant with)AFNOR NF X 15-211:2009Standard requirements).
Ergonomic design!
The tilted design of the front panel makes the operator more comfortable and provides a better view of the operation.
The oval and trapezoidal operation holes allow the operator's arms to move freely inside the cabinet, and the central protective area of the front panel provides safety to prevent chemical splashes.
The curved design of the front edge of the countertop provides comfortable arm support.
XLS 483 fume hoodofmain features:
Easy to install!
After receiving the goods, it only takes about 30 minutes to install a captair®flexTMProduct. After assembly, plug in the standard power socket and the fume hood can be used immediately.
After receiving the goods, it only takes about 30 minutes to install a captair®flexTMProduct. After assembly, plug in the standard power socket and the fume hood can be used immediately.
Provide safety protection for any workplace!
captair®flexTMIt is an independent instrument that can be installed at any location in the laboratory to provide safety protection for chemists. As they do not need to exhaust indoor air, even if multiple captairs are installed®There is no need to worry about the supply of fresh air in the laboratory. captair®Easy to move and can be installed on a roller cart (optional).
No consumption of air conditioning air!
Install a captair in the air-conditioned room®flexTMIt can help save a lot of energy because it does not require expensive air conditioning fresh air to be discharged. One year for one captair®flexTMThe cost of filters in fume hoods is much lower than the air conditioning consumption cost of traditional fume hood systems. Saved at least 85% of air conditioning consumption.
environmental protection!
During chemical operations, the filter will effectively filter out chemical gases, avoiding their overflow.captair®flexTMThe use of can protect the outdoor environment of laboratories, such as the environment of offices or nearby houses. With certain guidance, chemists can minimize the volatilization of chemical reagents as much as possible, and more operations can be carried outcaptair®flexTMInternally conducted.
XLS 483 fume hoodTechnical parameters
captair®flexTMIt is an independent instrument that can be installed at any location in the laboratory to provide safety protection for chemists. As they do not need to exhaust indoor air, even if multiple captairs are installed®There is no need to worry about the supply of fresh air in the laboratory. captair®Easy to move and can be installed on a roller cart (optional).
No consumption of air conditioning air!
Install a captair in the air-conditioned room®flexTMIt can help save a lot of energy because it does not require expensive air conditioning fresh air to be discharged. One year for one captair®flexTMThe cost of filters in fume hoods is much lower than the air conditioning consumption cost of traditional fume hood systems. Saved at least 85% of air conditioning consumption.
environmental protection!
During chemical operations, the filter will effectively filter out chemical gases, avoiding their overflow.captair®flexTMThe use of can protect the outdoor environment of laboratories, such as the environment of offices or nearby houses. With certain guidance, chemists can minimize the volatilization of chemical reagents as much as possible, and more operations can be carried outcaptair®flexTMInternally conducted.
XLS 483 fume hoodTechnical parameters
|
Size（mm）
length:48”Or 1300 mm L D H
（At the operating surface)
| |||
| model external internal external internal external internal | |||
| xls 483*1275 1172 790 692 1313-1495 1014 | |||
| Technical parameters | |||
| grade
（According to NFX15-211:2009 standard)
|
Class 1 （Each column is equipped with a double-layer molecular filter) or
Class 2 （Each column is equipped with a single-layer molecular filter
| Number of fans | 3 |
| Air handling capacity |
690 m3/h
| Number of filter boxes | 3 |
| Average surface wind speed | 0.4 to 0.6 m/s | Power consumption | 64-120 W |
| voltage | Input voltage: 100-240V Internal voltage: 24-26.5V (Low voltage) | Zui high current | 2.71-4.54 A |
| volume |
58 dbA
| ||
| frequency |
47-67hz
| Operation hole category | Fully open type |
|
midcapTM Simplified series without computerized control panel
| |||
Similar Product Recommend
