- Phone
-
Address
611 Xiangyu Smart South Building, Kaifu District, Changsha City, Hunan Province
Product Categories
Changsha Aikesipu Instrument Equipment Co., Ltd
Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope
NegotiableUpdate on 03/05
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Introduction: Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope specifications, bandwidth of 200 MHz, real-time sampling rate. The 2-channel series uses one 1 GSa/s ADC chip, and the 4-channel series uses two 1 GSa/s ADC chips. When all channels are turned on, the sampling rate of each channel is 50
Product Details
|
Dingyang SIGLENT SDS1204X-E Fluorescence Oscilloscope Specification Parameters |
|
| bandwidth | 200 MHz |
| Real time sampling rate | The 2-channel series uses one 1 GSa/s ADC chip, while the 4-channel series uses two 1 GSa/s ADC chips. When all channels are turned on, the sampling rate for each channel is 500 MSa/s, and the sampling rate for channel interleaving mode is 1 GSa/s |
| Number of channels | 4 |
| Storage depth | Channel interleaving mode 14 Mpts/CH, non interleaving mode 7 Mpts/CH |
| Maximum waveform capture rate | 400000 wfm/s (Sequence mode) |
| Trigger type | Edge, Slope, Pulse width, Window, Runt, Interval, Dropout, Pattern, Video, Serial Trigger (IIC, SPI, UART, CAN, LIN) |
| Decoding type (standard) | IIC, SPI, UART/RS232, CAN, LIN |
| USB arbitrary waveform generator (4-channel series supported, optional) | Single channel, maximum output frequency 25 MHz, sampling rate 125 MSa/s, waveform length 16 kpts |
| 16 channel logic analyzer (4-channel series, optional) | Maximum sampling rate of 1 GSa/s, storage depth of 14 Mpts/CH |
| Baud plot (4-channel series support, optional) | The minimum starting frequency is 10 Hz, the minimum scanning width is 500 Hz, the maximum scanning width is 120 MHz (limited by the current model bandwidth and signal source bandwidth), and the maximum scanning frequency is 500 frequency points |
| USB WIFI adapter (4-channel series supported, optional) | 802.11b/g/n， WPA-PSK， Only adapters provided by Siglent can ensure normal operation |
| Interface | USB Host, USB Device, Sbus (4-channel series supported, Siglent logic analyzer interface) LAN、Pass/Fail、Trigger Out |
| Standard probe | 4 sets/2 sets of passive probes PB470 |
| 4 sets/2 sets of passive probes PP510 | |
| 4 sets/2 sets of passive probes PP215 | |
| screen | 7-inch TFT-LCD display screen with a resolution of 800 * 480 |
| weight | 2-channel series: Net weight 2.5 kg; Gross weight 3.5 kg |
| 4-channel series: Net weight 2.6 kg; Gross weight 3.8 kg | |
Power Loop Response Analysis (Bode plot)
Stability is a very important indicator in power supply design. Generally speaking, stability measurement requires the use of a specialized frequency response analyzer, but its high price often makes people hesitate. Therefore, Dingyang Technology provides an economical solution: Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope and signal source are matched with the standard free Bode Plot II software to achieve power loop measurement.
·Newly developed Bode plot measurement core with higher measurement sensitivity and accuracy
·Variable excitation scanning mode, corresponding to other complex testing scenarios in the power control loop test box
·Humanized UI design, more friendly parameter settings
·List and cursor measurement provide more intuitive analysis results
A revolution in data analysis and processing
14 M full sampling point measurement, measurement accuracy and sampling accuracy are exactly the same, without distortion
14 M full sampling point operation, completed by adding a co processor for faster speed
1 M-point FFT operation, supports Peaks, Marks, and FFT point selection
Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope supports Zoom, Gating, Math measurement and statistical functions
Supports 38 automatic measurement functions
Hardware acceleration for smoother user experience
Deep storage, fast refresh
The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope adopts Dingyang's unique SPO technology, digital triggering system, high triggering sensitivity, and low jitter
256 level brightness and color temperature display, clearer
Waveform refresh rate of 400000 wfm/s, easily capturing abnormal waveforms
14 Mpts storage depth, in-depth view of waveform details
Standard serial decoding
Most oscilloscopes on the market do not come standard with serial CAN, LIN, I2C, SPI, RS-232/UART bus triggering and decoding functions, and additional options need to be purchased to enable this feature. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope comes standard with this feature and is open for free.
The waveform and data can be displayed simultaneously on the interface for easy viewing; Display the detailed information of decoding in the form of a list, and support the storage and export of data.
Powerful debugging and analysis capabilities
Event search and navigation, quickly locate events of interest
MSO logic analyzer integration, a powerful tool for mixed signal analysis
Combining historical and sequential patterns, abnormal signals are nowhere to be hidden
Hardware based Pass/Tail mode, suitable for long-term monitoring of signals
Remote control through web pages
The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope is embedded with a Web Server, which does not require the installation of driver software or upper computer software. The instrument can be remotely controlled, waveform observed, and measurement results obtained through a browser, meeting the application requirements of special environments such as high pressure and high temperature. The embedded virtual control panel is identical to the oscilloscope panel, making it easier and more convenient to use. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope supports both PC and mobile website layouts, making it easy to control and observe on mobile devices.
14 M full sampling point measurement, measurement accuracy and sampling accuracy are exactly the same, without distortion
14 M full sampling point operation, completed by adding a co processor for faster speed
1 M-point FFT operation, supports Peaks, Marks, and FFT point selection
Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope supports Zoom, Gating, Math measurement and statistical functions
Supports 38 automatic measurement functions
Hardware acceleration for smoother user experience
Deep storage, fast refresh
The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope adopts Dingyang's unique SPO technology, digital triggering system, high triggering sensitivity, and low jitter
256 level brightness and color temperature display, clearer
Waveform refresh rate of 400000 wfm/s, easily capturing abnormal waveforms
14 Mpts storage depth, in-depth view of waveform details
Standard serial decoding
Most oscilloscopes on the market do not come standard with serial CAN, LIN, I2C, SPI, RS-232/UART bus triggering and decoding functions, and additional options need to be purchased to enable this feature. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope comes standard with this feature and is open for free.
The waveform and data can be displayed simultaneously on the interface for easy viewing; Display the detailed information of decoding in the form of a list, and support the storage and export of data.
Powerful debugging and analysis capabilities
Event search and navigation, quickly locate events of interest
MSO logic analyzer integration, a powerful tool for mixed signal analysis
Combining historical and sequential patterns, abnormal signals are nowhere to be hidden
Hardware based Pass/Tail mode, suitable for long-term monitoring of signals
Remote control through web pages
The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope is embedded with a Web Server, which does not require the installation of driver software or upper computer software. The instrument can be remotely controlled, waveform observed, and measurement results obtained through a browser, meeting the application requirements of special environments such as high pressure and high temperature. The embedded virtual control panel is identical to the oscilloscope panel, making it easier and more convenient to use. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope supports both PC and mobile website layouts, making it easy to control and observe on mobile devices.
Most oscilloscopes on the market do not come standard with serial CAN, LIN, I2C, SPI, RS-232/UART bus triggering and decoding functions, and additional options need to be purchased to enable this feature. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope comes standard with this feature and is open for free.
The waveform and data can be displayed simultaneously on the interface for easy viewing; Display the detailed information of decoding in the form of a list, and support the storage and export of data.
Powerful debugging and analysis capabilities
Event search and navigation, quickly locate events of interest
MSO logic analyzer integration, a powerful tool for mixed signal analysis
Combining historical and sequential patterns, abnormal signals are nowhere to be hidden
Hardware based Pass/Tail mode, suitable for long-term monitoring of signals
Remote control through web pages
The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope is embedded with a Web Server, which does not require the installation of driver software or upper computer software. The instrument can be remotely controlled, waveform observed, and measurement results obtained through a browser, meeting the application requirements of special environments such as high pressure and high temperature. The embedded virtual control panel is identical to the oscilloscope panel, making it easier and more convenient to use. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope supports both PC and mobile website layouts, making it easy to control and observe on mobile devices.
The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope is embedded with a Web Server, which does not require the installation of driver software or upper computer software. The instrument can be remotely controlled, waveform observed, and measurement results obtained through a browser, meeting the application requirements of special environments such as high pressure and high temperature. The embedded virtual control panel is identical to the oscilloscope panel, making it easier and more convenient to use. The Dingyang SIGLENT SDS1204X-E fluorescence oscilloscope supports both PC and mobile website layouts, making it easy to control and observe on mobile devices.
Similar Product Recommend
