Petroleum products and synthetic fluids

Anti emulsification tester

DM-L6

GB/T 7305

ASTM D1401

GB/T 7605

　　DM-L6The anti emulsification performance tester for petroleum products and synthetic liquids is an instrument used to determine the ability of petroleum and synthetic liquids to separate from water. The design of the instrument conforms toGB/T 7305Method for determination of emulsion resistance of petroleum and synthetic fluids,ASTM D1401《ASTM D1401 - 10 Standard Test Method for Water Separability of Petroleum Oils and Synthetic FluidsAnti emulsification performance.Determination of Water Separability of Petroleum and Synthetic Liquids "andISO 6614-1983.
　　DM-L6The anti emulsification performance tester for petroleum products and synthetic liquids is also applicable to standardsGB/T 7605-2008Measurement method for demulsification degree of turbine oil during operation.

　　DM-L6The anti emulsification performance tester for petroleum and synthetic liquids consists of two parts: a constant temperature bathtub and an electrical control box. The thermostatic bathtub adopts a Φ300X300mmThe hard glass cylinder adopts a vertical structure, with a beautiful and elegant appearance. The unique notification function makes it easier for operators to use.

characteristic

　　This instrument consists of two parts: the measuring department and the control department.

　　1.The main body of the measuring department is a constant temperature bath, which consists of a glass cylinder, a heater, and a constant temperature bath stirring device. The heater junction box and mixing motor are installed on the glass cylinder head, which has five test holes. A vertical and stable bracket for fixing the measuring cylinder is installed in the water bath below the test holes.

　　2.Another important component of the testing department is the stirring device used to stir the sample, which consists of a stirrer and a power head. The power head is located above the glass cylinder and can be made larger than120Rotate the mixer so that it can mix the five test measuring cylinders separately.

　　3.The control unit consists of control devices and control panels installed inside the chassis. The control device consists of temperature control, speed measurement, automatic constant speed, five channel automatic timer and other systems.

　　4.The temperature controller can automatically control the temperature inside the constant temperature bath. Its range can be at room temperature-95℃Internally set by the operator themselves.

　　5.The automatic constant speed system can quickly and automatically maintain the speed of the mixer at a constant level1500turn/Divide and display the actual speed on the control panel through the speed measurement system.

　　6.Five automatic timers. This instrument can measure five samples at a time, and each sample can select one timer. During the experiment, press the corresponding timer button, and the mixer will start working. After five minutes, it will automatically stop stirring and start counting the separation time between emulsion and water5The minute timer is flashing1Minute, remind the operator to make a record. full60At the minute mark, an automatic alarm will sound and the timer will stop. Easy and intuitive operation, precise timing.

Instrument specifications

　　Applicable standards:GB/T7305-87，ASTMD1401-67,ISO6614-1983

　　Measure the external dimensions of the measuring part: Φ360×590mm(diameter x height)

　　External dimensions of the control department:360(W)×400(D)×130(H) mm

　　Temperature range of constant temperature bath: room temperature~95℃

　　Number of test holes:5individual

　　Measuring cylinder size: Φ32×225mm

　　Heating power:1.5KW

　　Constant temperature bath stirring motor:AC220V 25W

　　Sample mixing motor:DC24V 80W

　　Time display:5road

　　Power Supply:AC 220V、50HZ、7.5A

Standard attachments

　　·Experimental measuring cylinder

　　·Signal connection line

　　·Fuse220V/10A

　　·Power connection cable

　　·User Manual

GB/T 7305 GB/T 7605The experimental process and environment are basically the same, and the only accessory is the inconsistent inner diameter of the measuring cylinder.Please explain before placing an order.

GB/T 7305-2003Petroleum and synthetic liquids - Determination of water separation properties

GB/T 7605-2008Determination method for demulsification degree of turbine oil during operation

As needed, the company may make changes to the specifications and appearance of the instrument without prior notice. We hope for your understanding.