DK-8A Three Temperature Controlled Water Bath Pot

DK-8A Three Temperature Controlled Water Bath PotMain technical parameters:

Power supply: 220V 50HZ

Heating power: 3 * 300W

Temperature control range: RT-100 ℃

Water temperature fluctuation: ≤ 0.5 ℃

Temperature control accuracy: ≤ 1 ℃

Working volume: Each hole: 155mm × 160mm × 140mm

DK-8A Three Temperature Controlled Water Bath PotProduct Features:

① The box is made of cold-rolled steel plate, stamped with molds, with curved corners, no welding, and synthesized in one gas. Surface baking paint has strong rust prevention ability.

② The studio is made of stainless steel plate, with rounded corners, smooth, fluent, and easy to clean.

③ Using steel and brass pipes as heat sensing elements, installed under the partition of the box, directly immersed in water for fast heat transfer and high sensitivity.

④ The electric heating tube is made of U-shaped steel pipe, sintered magnesium oxide and electric heating wire, and directly immersed in water with less heat loss.

⑤ The outlet pipe is an extension type, which is beautiful, convenient, and durable.

⑥ The temperature control is manufactured using microcomputer intelligent digital technology, with industrial PID self-tuning and LED window indication functions. It has high temperature control accuracy, strong anti-interference ability, and easy operation.

⑦ There are three sets of water tanks and corresponding temperature control devices, which can be set for temperature and temperature control respectively.

⑧ The lid is a sleeve that can be used for measuring cups of different sizes.

Precautions for use:

1. This product uses a 220V AC power supply, and the power socket should use a three hole safety socket, which must be properly grounded.

2. Before powering on, water should be injected into the pot above the partition. During use, the heating tube should not be exposed to the water surface, otherwise the heating tube will burn or even burst, or the solder will melt and leak water, causing electric shock, etc.

3. Connect the power supply, display through the temperature control meter, and operate according to the product manual. This machine has two indicator lights for heating and constant temperature to indicate the working status, and the temperature gauge shows the actual temperature inside the pot.

4. When using 100 ℃ boiling water distillation, do not add too much water to prevent overflow during boiling.

Each hole is individually equipped with digital temperature control. The inner pot is made of 304 stainless steel, and the electric heating tube is installed in the middle of the water for fast heating and low power consumption. It is also equipped with a digital temperature control device, three sets of water tanks, and corresponding temperature control devices, which can be set for temperature control separately. The water bath pot is made of authentic 304 series stainless steel, and the box body is made of cold-rolled steel plate, stamped with molds, curved corners, no welding, and synthesized in one gas. The surface is coated with epoxy powder electrostatic spraying, which has strong anti rust ability and is widely used for distillation, drying, concentration, and impregnation of chemical or biological products.

Changzhou Gaode Instrument Manufacturing Co., Ltd. is a professional laboratory equipment manufacturer and a technology-based enterprise that integrates design, production, sales, and service. Strive to achieve perfection and serve people from all walks of life wholeheartedly throughout the entire process. Thank you for your attention! Welcome to inquire.