Chemical plant 500kg explosion-proof oil drum truck scale, manual round drum truck electronic scale

Paint factory 500kg explosion-proof oil drum truck scale, manual round drum truck electronic scale

Manual oil bucket truck scaleIt is an integrated equipment designed specifically for the handling, stacking, and weighing of round barrels, which can achieve manual functions of lifting and dumping, handling, and weighing of barrel cargo. A weighing professional equipment composed of a specially designed weighing sensor module and a display.

The manual bucket scale is made of carbon steel material and equipped with high-strength nylon rollers at the bottom of the scale body. The overall vehicle design structure is reasonable and operates safely.

The scale body can be connected to the optional weighing display for measurement use.

Applicable occasions:

The manual electronic oil drum scale (referred to as the manual pouring scale) suitable for the handling and weighing equipment of oil drums in chemical plant areas not only reduces the manual oil drum handling operation, but also greatly improves the production efficiency and weighing efficiency of the factory.

Specifications:

Paint factory 500kg explosion-proof oil drum truck scale, manual round drum truck electronic scaleStandard configuration:

1. Two high-precision shear beam weighing sensors;

2. XK3190 series intelligent AC/DC dual-purpose weighing display instrument;

3. Four adjustable moving wheels;

4. A high-quality oil tanker truck.

Operating standards:

1. The ground of the usage environment must be kept flat and hard. Uneven ground will affect the accuracy of weighing and reduce the service life of the product;

2. After connecting the signal line of the weighing display to the steel cylinder scale body, turn on the power, preheat for 5-10 minutes, and check if the weighing display returns to zero normally;

3. Press and hold the environmental control button to adjust the oil tank, so that the oil tank reporting arm is in the middle position, tighten the locking bolt to report the oil tank;

4. Push forward the lifting control handle to lift the oil tank off the ground, and read the weighing data after the weighing display stabilizes;

5. If there is a material pouring operation, press and hold the forward rotation button (red) to reverse the oil drum back to its normal position;

6. Pull back the lifting control handle, slowly lower the oil tank to the ground, loosen the bolt, and pull out the bucket scale.