Cable burning wire vertical combustion testing machine

Cable burning wire vertical combustion testing machineTechnical Specifications

1. Burner: inner diameter of Φ 9.5mm+0.3mm single gas and inner diameter of Φ 9.5mm ± 0.5mm Bunsei

The lamp.

2. This lamp comes with an air conditioning nut to adjust the height of the blue flame.

3. The flame application time of the Hongsheng lamp can be set arbitrarily.

4. Burner test inclination angle: adjustable from 0 to 45 °, fixed every 5 ° between 0 and 45 °

And switch back and forth.

5. Flame height: adjustable from 20mm+2mm to 100mm+10mm.

6. The Bensheng lamp is quickly moved to the style end by a motor. After the flame application is completed, the Bensheng lamp will automatically return.

7. The flame application time of this lamp is adjustable from 0 to 999.9S+0.1s, and can be set arbitrarily within the range. The flame

Adjustable from 20 to 175mm.

8. Residual flame time: adjustable from 0 to 999.9S+0.1s, automatically recorded by the instrument, manually paused.

9. Remaining burning time: adjustable from 0 to 999.9S+0.1s, the instrument automatically records and manually pauses.

10. The experimental gas source uses 98% methane, coal gas, or liquefied petroleum gas

11. The methane flow rate can be adjusted from 105ml/min to 1000ml/min.

12. There is an electronic switch on the gas pipeline, and after the test is completed, the gas switch on the panel will be turned off to cut off

Gas source. The local lights automatically turn off.

13. The up, down, left, and right strokes of the style rack are all greater than 300mm.

14. Box material: frosted stainless steel.

15. The top of the test chamber is equipped with an exhaust fan, which can discharge toxic substances after the test is completed.

16. Automatic control and independent ventilation during the experimental process.

17. Equipment dimensions: width 1160mm, depth 600mm, height 1310 (including feet) mm.

18. Combustion test area volume:>0.5 cubic meters, length * width * height approximately 900mm × 590mm ×

1050mm, Background black, background illumination ≤ 20Lux.

19. Flame calibration device (optional)

Cable burning wire vertical combustion testing machineSample production requirements

Style and Size List

Introduction to the operating interface

1. Power on interface

The first interface has three experimental methods: horizontal method, vertical method, and self editing. The selection key for point response is entered

Enter the corresponding interface

2. Horizontal method interface

(1) Ta - The following value represents the flame application time, which can be directly clicked to enter the keyboard interface

Change the time.

(2) The line "Click Back" in the upper left corner is the reset button. Clicking it will reset it to the boot interface

(3) Adjustment key - click on the BenSheng lamp to move to the style end and adjust the style to match the BenSheng lamp

Press the stop button to retract the distance

(4) Start - Press once, the local light will automatically advance to the style end

(5) Stop - Press the button to return the local light to its original position

(6) Exhaust - Press the exhaust fan once to exhaust, then press it again to stop the exhaust

(7) Gas - Press the gas button once to turn it on, then press the gas button again to turn it off

(8) Ignition - Press the igniter to automatically ignite three times

(9) Lighting - Press once to turn on lighting, press again to turn off lighting

(10) Up - Press and hold the style box to move upwards, release to stop moving

(11) Down - Press and hold the style box to move downwards, release to stop moving

(12) Save - Save the experimental data, and a set of patterns will be automatically completed during the experiment

Jump out of the save interface

(13) Timing - Observe the burning situation of the pattern and click

(14) L - The following values are modifiable and can be directly modified by clicking on them

When the pattern does not burn to the 100mm mark, the measured burning length should be modified to actual

Inter length