CM-230D Intelligent Conductivity Measurement and Control Instrument Price

CM-230D Intelligent Conductivity Measurement and Control Instrument is cheap, welcome to purchase!

CM-230D Intelligent Conductivity Measurement and Control InstrumentFeatures and Applications:
Keyboard style setting of electrode constants, with the ability to set upper and lower values for over limit alarms. By switching with buttons, the medium temperature, μ S/cm, and ppm (TDS) conversion can be viewed, with automatic range conversion. Three electrode constants (0.1cm-1, 1.0 cm-1, 10.0 cm-1) can be selected, supporting a wider measurement range.
Ultra stable measurement acquisition, wide temperature and low drift design, measurement status can be switched between conductivity/temperature/TDS, water quality exceeding alarm function, high brightness background light LCD display.
Suitable for online monitoring and control of electrodialysis, reverse osmosis, ion exchange water production systems, cooling water control systems, and general industrial water.

CM-230D Intelligent Conductivity Measurement and Control InstrumentMain technical indicators:
Measurement range:
Conductivity: 0~19.99 0~199.9 μ S/cm (0.1cm-1 electrode)
0-199.99 0-199.9, 0-1999 μ S/cm (1.0 cm-1 electrode)
0-199.9 μ S/cm 0-1999 μ S/cm 0-19.99mS/cm (10cm-1 electrode)
Temperature: 0-50 ℃.
Electrode configuration: 0.1cm-1316L stainless steel electrode, 1/2 "(4-point) pipe type threaded connection; □
1.00cm-1 plastic platinum electrode, 1/2 "(4-point) pipe type threaded connection; □
1.00cm-1 stainless steel electrode, 1/2 "(4-point) pipe type threaded connection; □
10.0 cm-1 Teflon platinum electrode, 3/4 "(6 minutes) pipe type threaded connection; □
Wire length: standard configuration is 5m; agreed upon m;
Medium pressure: 0-0.5MPa.
Medium temperature: 0-50 ℃;
Thermal compensation component: NTC;

CM-230D Intelligent Conductivity Measurement and Control InstrumentDisplay mode: conductivity 31/2-digit LCD digital display, temperature 3-digit digital display;
Accuracy: 1.5% (FS);
Stability: ± 1.5 × 10-3 (FS)/24h;
Temperature compensation: Based on 25 ℃, digitally calculate compensation;
Output signal: Non isolated, transferable 4-20mA current;
Maximum load impedance: 300 Ω Max@DC 9V ；
Relay withstand load: AC 230V/5A Max (no inductance);
Output control mode: ON/OFF dual contact relay output;
Power supply: AC 220V ± 10%, 50HZ;
Power consumption: 2W
Environmental conditions: Temperature: 0-50 ℃;
Humidity: ≤ 85% RH;
Dimensions: 48 × 96 × 100mm (height × width × depth).
Hole size: 45 × 91mm (height × width).
Installation method: panel installation.
Acceptance criteria: Q/SKY01-2005.