CEDAR idle digital torque screwdriver

Sugisaki Jiji NDID-150CN Japan Sida CEDAR Idle Digital Torque Screwdriver Function:

Tightening and final inspection of screws and bolts

Digital torque drive idle type

If tightened with a "click" until a sound is produced, both the torque and the number of fasteners can be recorded, using an idle torque driver.

After reaching the specified torque value, the clutch will automatically disconnect and idle, so there is no need to worry about overtightening.

Sugisaki Jiqi NDID-150CN Japanese Sida CEDAR idle digital torque screwdriver features:

Adjustable idle torque

Management of tightening torque and number of fasteners

Record peak torque data and torque variation data

Save and transfer data to USB storage

Intelligent type with excellent functionality

USB storage accessory

Appearance 34 × 34 × 206mm (handle diameter 30)

The upper and lower torque settings are OK! The buzzer indicator light indicates the set value

Data storage: 400 pieces of data can be output to USB storage

Rechargeable battery drive is convenient! And it automatically shuts down and operates with peace of mind

Real time data output, capable of performing various torque checks

Sugisaki Jiqi NDID-150CN Japan Sida CEDAR Idle Digital Torque Screwdriver Technical Parameters:

Measurement range: 0.020-1.500N · m (2.0-150.0cN · m)

Accuracy: ± 1%+1 digit (excluding the accuracy of grip idle torque) (20 ℃)

Usage temperature: 10-35 ℃ (storage temperature 0-45 ℃)

Display: 4-digit digital display on LCD screen

Measurement direction: CW-CCW (right, left)

Battery: Ni MH has been charged over 300 times (approximately 3 hours of charging time)

Automatic power off: unused for 3 minutes (can be reset)

Attachment: AC adapter, 1 bit each (# 1, # 2), hex wrench, USB memory, calibration file

Measurement mode

Screw tightening counter: PPC: peak value when holding clamp idle

Result: By clearing the number of management screws tightened (measured in the set tightening direction)

Peak holding: PP: holds the peak value of the input (tightened by right rotation and left rotation)

Real time output: C: Detect the set tightening direction and torque, record 500 pieces of data

Track: -: Display load torque value

Memory function

Screw Tightening Counter: PPC: USB Memory

Peak holding: PP: Host (up to 400 pieces)

Real time output: C: USB storage

Tra: -: None