BINDER VDL23 vacuum drying oven

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BINDER VDL23 vacuum drying oven

Product Details

BINDER VDL23 vacuum drying oven

1、 Product Introduction:

1. Temperature range: ambient temperature plus 15 ℃ to 200 ℃

2. Equipment chambers that comply with ATEX standards: Ex II -/3G c IIB T3-T1 Gc X

3 APT.line^TMPreheating chamber technology

4. Controller using interval programming and real-time programming

5. 2 aluminum expansion brackets

6. Inert gas interface

7. Anti impact safety glass panel with spring plates

8. Overpressure sealed toolbox with compressed air interface

9. Pressure monitor, used for heating and releasing<125 mbar

10. Fireproof sealing ring

11. Independent adjustable temperature safety device level 2 (DIN 12880) with optical alarm

12. Computer interface: RS 422

2、 Technical parameters:

Product model	VDL023-230V¹
Choose a model	standard
Item code	9030-0038
measure
Internal volume [L]	23
Net weight of equipment (unloaded) [kg]	63
Maximum total load [kg]	35
Maximum load per partition [kg]	20
The dimensions of the casing do not include additional components and connectors
Net weight width [mm]	515
Net weight at height [mm]	655
Depth net weight [mm]	500
Wall to side distance [mm]	135
Wall distance from rear [mm]	100
Observation window width [mm]	250
Observation window height [mm]	207
Internal dimensions
Width [mm]	285
Height [mm]	285
Depth [mm]	295
The number of doors
Outer door	1
firmware
Number of partitions (hours/maximum)	2/4
Temperature performance data
The temperature range exceeds the indoor temperature by 15 ℃ to [℃]	200
Temperature deviation within 100 ℃ [± K]	1.5
Temperature fluctuation [± K]	0.1
Heating time to 100 ℃ [min]	65
Vacuum data
Allowable maximum vacuum [mbar]	0.01
Leakage rate [bar/h]	0.01
Electrical data
Rated voltage [V]	230
Power frequency [Hz]	50/60
Rated power [kW]	0.8
Equipment safety device [A]	10
Phase (rated voltage)	1～
Connecting components
Vacuum interface with small flange	16
Test hole with small flange	16
Inert gas interface with flow restrictor (RP)	3/8
Compressed air interface for overpressure sealing structure [mm]	8

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. We reserve the right to make technical changes.