BINDER VDL series vacuum drying oven VDL23 VDL53 VDL115

Product Introduction

The binder VDL series is a safe vacuum oven suitable for unlimited solvents. Vacuum processing of items containing solvents can pose significant safety hazards to personnel and the environment. The safety devices used in the VDL series safety vacuum oven have undergone TUT-SUDWEST safety testing and are explicitly approved for drying explosive substances containing solvents.

BinderThe outstanding advantages of vacuum drying oven

APT.Line^@Internal preheating technology

Binding Core Technology - APT.Line^@Air jacket technology and extended shelving technology

Binder VDLTechnical characteristics of series vacuum drying oven

1) Electronic controlled APT Line @ internal preheating technology with two extended shelves;

2) Temperature range: Room temperature+15 ℃ to 200 ℃;

3) MP program controller, with 2 programs (10 sections each) or switchable to 1 program (20 sections);

4) The interval time between each section of a single program can be adjusted to a maximum of 99:59 hours or 999:59 hours, which is suitable for all sections of the program;

5) Digital temperature setting with an accuracy of 0.1 ℃;

6) The heating rate can be adjusted through a program editor;

7) The pressure monitor controls the vacuum degree to be less than 125mbar before starting the heating load;

8) Using compressed air to seal the instrument room against overpressure;

9) Tested time timer;

10) Fireproof lining;

11) Precise quantitative ventilation valve;

12) Equipped with explosion-proof spring safety glass door;

13) Using cross flow technology and precise quantitative gas supply valve to connect inert gas;

14) Independent adjustable temperature safety device, level 2 (DIN 12880), with visual temperature alarm;

15) Rear diameter 16mm measurement interface;

16) Simulated pressure gauge (displaying the pressure difference between the internal cavity and the surrounding environment);

17) The inner cavity of electrolytic polishing;

18) All suction and ventilation pipes, as well as pressure vessel valves, detachable shelving slots, and vacuum valves welded internally, are made of corrosion-resistant stainless steel material 1.4571 (V4A)/AISI 316Ti;

19) The sealing gasket of the box door is made of tempered silicon material;

20) RS 422 interface, used for communication software APT-COM @ data control system; Or use the RS 232/RS 422 interface converter to convert to the printer output port;

Binder VDLTechnical specifications for series vacuum drying oven