BINDER ED720 drying oven

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BINDER ED720 drying oven

Product Details

BINDER ED720 drying oven

1、 Product Introduction:

1. Temperature range: ambient temperature plus 5 ℃ to 300 ℃

2. Up to 30% more energy-efficient than common devices on the market

3. Utilizing APT.line ™ Technology achieves high temperature accuracy

4. Natural convection

5. Controller with LCD display

6. Exhaust valve electromechanical control

7. 2 chrome plated sockets

8. Integrated independently adjustable temperature safety device level 2 (DIN 12880) with optical alarm

9. Ergonomic handle design

10. USB interface for recording data

2、 Technical parameters:

PRODUCT MODEL	ED720-400V¹
Choose a model	standard
Item code	9010-0341
measure
Internal volume [L]	743
Net weight of equipment (unloaded) [kg]	169
Maximum total load [kg]	315
Maximum load per partition [kg]	45
The dimensions of the casing do not include additional components and connectors
Net weight width [mm]	1165
Net weight at height [mm]	1590
Depth net weight [mm]	870
Wall to side distance [mm]	100
Wall distance from rear [mm]	160
Internal dimensions
Width [mm]	960
Height [mm]	1280
Depth [mm]	605
The number of doors
Inner door	2
Outer door	2
Data related to the environment
Energy consumption at 150 ℃ [Wh/h]	700
firmware
Number of partitions (hours/maximum)	2/16
Temperature performance data
The temperature range exceeds the indoor temperature by 5 ℃ to [℃]	300
Temperature deviation is 150 ℃ [± K]	3.2
Temperature fluctuation at 150 ℃ [± K]	0.8
Heating time to 150 ℃ [min]	85
The recovery time after opening the door in 30 seconds is 150 ℃ [min]	25
Electric data
Rated voltage [V]	400
Power frequency [Hz]	50/60
Rated power [kW]	4.1
Equipment safety device [A]	16
Phase (rated voltage)	3～

1. All technical data is only applicable to standard specifications of unloaded equipment at an ambient temperature of 22 ± 3 ℃ and a power supply voltage fluctuation of ± 10%. Determine temperature data according to BINDER factory standards and DIN 12880:2007, and adapt to the recommended wall gap of 10% of the internal chamber height, width, and depth. For series devices, all data are typical averages. We reserve the right to make technical changes.