Axial intelligent pressure controller pressure switch

NegotiableUpdate on 02/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The QYK105Z axial intelligent pressure controller is a pressure measurement and control product that integrates pressure measurement, display, output, and control. This product is a fully electronic structure, with an isolation film filled oil core at the front end. It is converted from high-precision A/D, processed by a microprocessor, displayed on site, and outputs one analog signal and two switch signals. The intelligent pressure controller is installed axially, easy to install and debug on site, flexible to use, easy to operate, and safe and reliable. Widely used in industries such as hydropower, tap water, petroleum, chemical, mechanical, hydraulic, etc., for on-site measurement, display, and control of fluid medium pressure.

Product Details

QYK105ZAxial intelligent pressure controller

1、 Product Introduction

The QYK104Z/105Z axial intelligent pressure controller is a pressure measurement and control product that integrates pressure measurement, display, output, and control. This product is a fully electronic structure, with an isolation film filled oil core at the front end. It is converted from high-precision A/D, processed by a microprocessor, displayed on site, and outputs one analog signal and two switch signals.

The intelligent pressure controller is installed axially, easy to install and debug on site, flexible to use, easy to operate, and safe and reliable. Widely used in industries such as hydropower, tap water, petroleum, chemical, mechanical, hydraulic, etc., for on-site measurement, display, and control of fluid medium pressure.

2、 Product Features

●100mmStandard instrument installation

●On site setting of two control points

●4~20mAStandard signal output (optional)

●Two control point relay outputs24VDC 5A 220VAC 3A

●4bitLEDDigital display, ignoring value errors

Axial installation, easy to use

3、 Technical performance

Range of measurement	-100...0~35...1000(KPa)	Display mode	0.56 'digital tube
Range of measurement	0～2、20、35……100（MPa）	Display Range	-1999~9999
Overload pressure	≤1.5 times the rated range	Medium temperature	－20～+85℃
Measurement medium	Various compatible with 316L stainless steelgas, liquid	environmentTemperature	－10～+60℃
Supply voltage	24VDC/220VAC	Relative humidity	0~80%
Output signal	4-20mA standard signal output (optional) Two way relay switch output	Response time	≤1ms
Output signal		Sampling rate	4 times per second
accuracy	±0.5%F. S	Pressure interface	External thread M20 × 1.5Or users themselvesdefinition
Long term stability	≤±0.2%F. S/year	Electrical interface	terminal block

4、 Exterior structure:（mm）

轴向智能压力控制器压力开关

5、 Product selection

QYK105Z								Axial intelligent pressure controller
	G								gauge pressure
	A								absolute pressure
		0~X (KPa or MPa)						range
			J05					±0.5%FS
				C1				4~20mA output
				C5				Two sets of relay switch signals
				C0				special
					M1			M20 × 1.5 external thread
					M2			G1/2 external thread
					M0			special
						V1		24VDC power supply (BPK104Z)
						V2		220VAC power supply (BPK105Z)
							F5	Wiring terminal outgoing line
							F0	special