Automatic production line for water heaters

NegotiableUpdate on 05/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This production line is used for welding the inner liner of electric water heaters. It can be used for both online production and single machine manual production. By changing molds, adjusting relevant mechanisms or parameters, different products can be switched to meet the production requirements of different orders. Production capacity of 3000pcs/shift (note: 10h/shift, production capacity data is calculated based on single bladder). The operator is mainly responsible for the loading and unloading of equipment products, material transfer between various machines, resolution of operational abnormalities, and handling of non-conforming products.

Product Details

technological process:

Round cylinder body → Tunnel welding → Water nozzle punching → Inner liner expansion → Flange and hook welding → Three gun water nozzle welding → Inner liner end cap assembly → Pre point circumferential seam welding → Inner liner hanger welding → Inner liner leak detection

Main configuration and parameters

Main configuration		Parameters
Name	Quantity (unit)	Name	parameter
Fully automatic four roll coiling machine	2 sets	Workpiece length	380mm-1000mm
Through tunnel welding	4 sets	workpiece diameter	Φ200-Φ410mm
Flaring Machine	1 set	Workpiece thickness	1.2-2.5mm
punch press	1 set	Tact Time	30S/PCS
Pre point circumferential welding	3 sets	capacity	1200pcs/class
Three gun water nozzle welding	1 set	welding method	TIG/MIG welding
Four gun hanging plate welding	1 set	staffing	9 people
Welding of flanges and hooks	1 set	Venue requirements	80 square meters
pipeline	1 set	power consumption	301.4kw
Test water and leak	4 sets

Through tunnel welding

Three gun water nozzle

Fully automatic four roll coiling machine

Four gun hanging rack special aircraft

Pre order circular seam machine