1220S fully automatic insertion and extraction force testing machine

Resolve fixture issues for various connection tests, and ensure automatic alignment of male and female connectors during testing without the problem of one-sided feeding.

This machine is suitable for testing the insertion and extraction force of various connectors, and with a dedicated automatic centering device, it can obtain completely accurate resultsInsertion and extraction force test, inspection report, etc.

Test project

Single hole plug and unplug test for connectors

Connect the whole row insertion and extraction test and the connector insertion and extraction life test

Connector sheetPinPlastic retention test

connectorNORMAL FORCEtest

General compression and tensile failure tests

Can simultaneously touch the impedance machine edge (optional)

Machine features

Printable and storable graphics (plug-in displacement curve, lifespan curve, inspection report)

Test data is stored on the hard drive (each data can be stored, unlimited times)

The testing conditions are all set in writing by the computer, which is convenient and fast (including insertion and extraction stroke, speed, pause time, etc.)

The header content of the inspection report can be modified at any time (in both Chinese and English)

The inspection report can be transferred toExcelBe an editor

The advantages of this plug-in force testing machine compared to peers are:

1Has a patent number and successfully applied for a national patent.

2Curve chart report, text report can be specified by the customer with header andLOGO；

3Automatically generatedEXCEL, automatically generatedCPK；

4Can be equipped with impedance testing to detect the dynamic contact resistance of the connector while testing the force value and stroke (note: optional),Impedance testing can reset the terminal to zero

5The load sensor is equipped with double-layer protection to effectively protect the load element of valuable items that are prone to damage

6The analog-to-digital signal conversion adopts a data acquisition card, and the load and displacement analog signals are distinguished and converted, with strong anti-interference ability

7The maximum speed can reach600mm/min(Optional)

8Software independent development, can be modified according to customer requirements;

9Constant tensile and compressive testing, with adjustable ratio force and fracture ratio return.

10Provide an open calibration program that does not require password input for verification.

Equipment composition

1Testing machine body 2Computer, monitor, printer3No load（50、20、5、2kgChoose one) 4Large scaleX-Ymobile station

5Automatic centering device for whole row insertion and removal (multifunctional clamping fixture)

Option

·Milling machine (special fixture for deformable connectors) ·SinglepinSpecial fixtures for plastic retention force ·Frame height fixture (dedicated for wire outgoing lines) ·Dynamic impedance testing system.