1、 Operating standards and parameter management

1. Standardize operational procedures
   • Before use, it is necessary to carefully read the operation manual, master the device functions and band application fields, and avoid hardware damage caused by misoperation.
   • Set exposure time, filter, wavelength and other parameters according to actual needs, and verify whether the parameters are consistent with experimental requirements to ensure data accuracy.
   • Maintain camera stability during operation to avoid shaking or vibration that may affect imaging quality; Before shooting, it is necessary to clean the lens of dust and use filters if necessary to improve image quality.
2. Storage and Power Management
   • Ensure that the computer or storage card has sufficient space to avoid data loss due to insufficient storage; Regularly check and format storage devices to ensure normal data reading and writing.
   • Check the connection and stability of the power cord, and regularly monitor the safety of the power supply for equipment that requires long-term operation; Remove the battery when not in use to prevent leakage and damage to the camera.

2、 Environmental Management and Protection

1. Temperature and Humidity Control
   • Keep the operating environment clean and ventilated, with temperature controlled at 18-27 ℃ and humidity of 40% -60%, avoiding high temperature, humidity, or electromagnetic interference environments.
   • When not in use for a long time, store the camera in a drying oven or sealed cabinet and place a desiccant to absorb moisture; When shooting outdoors, the camera can be wrapped in a moisture-proof bag.
2. Dust and collision prevention
   • Regularly clean equipment interfaces, connectors, and cables to prevent dust from entering the interior; When replacing the lens, keep the mount facing downwards to reduce dust intrusion.
   • Use a professional photography bag to store the camera, equipped with soft materials and compartments inside to avoid compression and collision; When carrying, the camera can be secured with a belt to prevent accidental drops.

3、 Hardware cleaning and maintenance

1. Lens cleaning
   • Use an ear blowing ball to gently remove dust from the surface of the lens, avoiding direct wiping; Wipe clockwise with a professional lens cloth or lens paper, and use a lens pen to handle oil stains or fingerprints.
   • Stubborn stains can be wiped with a small amount of lens cleaning solution, but alcohol or solvents should be avoided to prevent damage to the coating; A small amount of dust can be temporarily left untreated to prevent frequent wiping and damage to the lens.
2. Sensor and interface maintenance
   • Regularly check the sensor for dust, use specialized cleaning tools if necessary, and strictly follow the instructions in the manual for operation.
   • Clean the lens and camera interface to ensure a tight connection; When not in use for a long time, place the camera in a moisture-proof box and maintain a dry environment.

4、 Software and firmware maintenance

1. Driver and firmware updates
   • Regularly check and update camera drivers and firmware, fix potential vulnerabilities, and improve device stability.
   • Use original or reliable batteries and chargers to ensure battery safety and stability; Charge and discharge batteries that have not been used for a long time every two months to maintain lithium-ion activity.
2. Data backup and management
   • Use high-speed and high-capacity storage cards to regularly backup data and prevent loss; Avoid abruptly unplugging the storage card during read and write operations to prevent data damage.

5、 Troubleshooting

1. Unable to power onCheck if the power cord is properly plugged in, if the battery is fully charged, and if the driver program is installed correctly.
2. Imaging blurClean lens stains, check exposure time and white balance settings, and confirm if the light source is working properly.
3. Storage errorCheck the storage device space and status, and clean up disk errors.
4. Unstable connectionConfirm that the connecting wire is not damaged and the connecting port is not blocked by foreign objects.