The vortex air pump is directly connected to the motor and impeller, with low noise and high efficiency. The vulnerable parts only have two bearings, one on the bearing seat at the end of the motor and the other on the bearing seat of the front housing. The medium gas transported by the vortex air pump is oil-free and pollution-free.

Before starting the operation of the vortex air pump blower, please check the following points and confirm that they are correct before starting.

1. Piping

Is there any foreign object inside the piping, and is the joint secure,Is the valve fully open.

2. Power supply

Wire connection, voltage, frequency (period), etc.

3. Direction of rotation

Please rotate the fan in the direction indicated by the arrow. If water enters the blower due to reverse rotationImmediately rotate in the direction indicated by the arrow for 30 minutes to 1 hour to prevent rusting.

Pay attention to any abnormalities (such as sound, pressure, current, temperature, etc.) during operation. If any abnormalities occur, immediately stop the operation and investigate the cause

If none of the above problems occur, you can run with confidence.