The evaluation of our company by old customers, choosing the right time and company, Shanghai Quanfeng Industrial Co., Ltd. is really impressiveHigh temperature resistant blowerIt mainly consists of impeller, casing, air inlet, motor, connector, cooling fan blades, and other parts. The impeller adopts a multi blade single inlet centrifugal impeller made of galvanized or cold-rolled steel plate, and the blades are designed based on aerodynamic principles. The impeller consists of 10 aft tilting airfoil blades, a curved front plate, and a flat rear plate. The material is made of high-strength and durable steel plates, and undergoes strict dynamic and static balance correction. Good air performance, high efficiency, and smooth operation. The air inlet adopts a convergent streamlined vortex reduction form, with minimal airflow loss and high working efficiency of high-temperature resistant blowers.
The casing of the high-temperature resistant blower is connected to the motor through a metal casting installation. The motor shaft head is equipped with a cooling fan blade, and the outer wall of the metal casting is provided with inlet and outlet pipe interfaces to cool the metal casting and shaft head, ensuring the normal operation of the motor at high temperatures. The motor adopts a special high-temperature motor, and the fluid part of the high-temperature fan is made of heat-resistant materials, with reliable cooling structure performance. Compared to other boiler induced draft fans, it has the advantages of simple structure, easy maintenance, and high cost-effectiveness.
High temperature resistant blowers are used in the drying industry, boiler industry, cleaning industry, painting industry, and food drying industry. The operating temperature is between 100 ℃ and 180 ℃. The transported gas is air or other non self igniting, non exploding, non entangling, harmless to the human body, and non corrosive to steel materials. It can also be used to transport non corrosive, non self igniting, and non viscous hot gases, vapors, and smoke in various industries. Other materials with similar performance can also be selected, but the temperature of the conveying medium must not exceed its rated temperature range. There shall be no viscous substances in the gas, and the dust and hard particles contained shall not exceed 150mg/m3. If the dust content is high, a dust removal device with a readiness of not less than 85% must be installed before the fan to reduce the dust content of the flue gas entering the fan and improve the service life of the fan.
There are two forms of high-temperature resistant blowers. From one side of the motor, if the impeller rotates clockwise, it is called a right cyclone machine, represented by "right"; The impeller rotating against the needle is called a left cyclone machine, represented by "left". The outlet position of the high-temperature resistant blower is represented by the angle of the air outlet of the casing. Fans No. 1.5-6 are all made into an adjustable type when they leave the factory, and the user unit installs them in the required position according to requirements. The adjustment range of the air outlet position is 0 ° to 255 °, with an interval of 45 °. The transmission mode is all "A" type direct drive. I won't say much, action is better than excitement Come on, with your bright eyes, Shanghai Quanfeng Industrial Co., Ltd. welcomes you. We have excellent technology and quality waiting for you. (www.shqf1688... com)