1、 Daily cleaning

• Equipment surface cleaningRegularly clean the surface of the equipment, including removing dust, oil stains, and other debris. You can use a soft cloth or brush to wipe the surface of the equipment and clean it with an appropriate cleaning agent.
• Internal structure cleaningWhen cleaning the surface of equipment, attention should also be paid to the internal structure of the equipment, especially the transmission system and electrical system, to prevent dust and dirt from entering the equipment and affecting its normal operation.

2、 Component lubrication

• Lubrication of moving partsRegularly lubricate the moving parts of the equipment, such as transmission screws and screw parts, to ensure their normal operation. Use appropriate lubricants and lubricate according to the equipment manufacturer's recommendations.
• Electroplating maintenanceThe electroplating part can be wiped with engine oil or rust proof oil to prevent rust and maintain brightness.

3、 Fastener inspection

• regular inspectionRegularly check the bolts, nuts, and other fasteners on the equipment to ensure they are in a tight state. If there is any looseness, it should be tightened in a timely manner to prevent the equipment from loosening or falling off during operation.

4、 Regular inspection and calibration

• comprehensive inspectionIt is recommended to conduct a comprehensive inspection once a month, including the appearance, internal structure, electrical system, etc. of the equipment. During the inspection process, special attention should be paid to the cleanliness of the equipment to avoid damage caused by dust, oil stains, etc.
• Calibration equipmentFor instruments that require calibration, such as sensors, regular calibration should be performed to ensure their accuracy. The calibration cycle can be determined based on the usage of the equipment and the manufacturer's recommendations.

5、 Environmental control

• Temperature and humidityThe temperature and humidity of the equipment should be controlled within a certain range to prevent equipment malfunctions due to environmental factors. Generally speaking, the laboratory temperature should be maintained at 20 ℃± 5 ℃, in an environment without external airflow and thermal radiation.
• Power requirementsEnsure that the power supply voltage and frequency of the equipment meet the requirements of the equipment, the voltage fluctuation range should be within ± 5% of the rated value, and the equipment should be reliably grounded.

6、 Dust and corrosion prevention

• dustproof measuresWhen the device is not in use, appropriate protective measures can be taken, such as using a dust cover to cover the device to prevent dust from entering the interior.
• Anti corrosion treatmentFor equipment that is not used for a long time, its metal parts should be treated with anti-corrosion measures, such as applying rust proof oil.

7、 Software system maintenance

• Software UpdateIf the device is equipped with a software system, the update status of the software system should be checked regularly to ensure that it is the latest version.
• data backupRegularly backup software systems to prevent data loss.

8、 Standardized operation and recording

• Standard operationThe equipment must be operated by specialized personnel, and the testing should be strictly carried out in accordance with the operating procedures. It is strictly prohibited to conduct tests beyond the scope.
• Record maintenance statusThe maintenance of equipment should be recorded, including maintenance time, maintenance content, fault handling, etc., for traceability and management.