-
E-mail
1987440091@qq.com
-
Phone
19901806598
-
Address
No. 77 Shenglong Road, Jiufu Development Zone, Songjiang District, Shanghai
Shanghai Prima Electronics Co., Ltd
New | Voltage detectable electrostatic discharge generator
Date: 2025-07-25Read: 10
PESD-30T1 is specifically designed for electromagnetic compatibility electrostatic discharge (ESD) immunity testing requirements, providing an evaluation basis for the performance of electrical and electronic equipment when subjected to direct electrostatic discharge interference from operators and neighboring objects. It can be used to test the electrostatic immunity of semiconductor devices such as LEDs, transistors, and ICs, and is widely used in semiconductor devices, electrical and electronic equipment, communication equipment, household appliances, automotive electronics, medical devices, and other fields.
Product Features
1. Equipped with voltage detection function
2. Switching between positive and negative polarities at will
3.10.1 inch touch screen operation
4. Chinese English mode
5. Standard 150pF, 330 Ω resistor capacitor kit
6. Built in international standard level parameters
7. The maximum test voltage can reach 30kV
8. Intelligent detection of air discharge failure
9. User customizable mode, editable name
10. Support single, continuous, 20pps scan discharge
11. Built in temperature and humidity, time, real-time high voltage display
12. The discharge gun head can be freely replaced
13. Built in RJ45 and RS232 interfaces for communication
EMC electromagnetic compatibility
Main features of the equipment
User mode customizable name
Customizable user name with notes for different testing requirements
Voltage detection function
Insert the tip of the electrostatic gun into the HVINPUT panel of the instrument, and then clamp the crocodile clip of the electrostatic gun to the grounding terminal of the instrument
Click on System Settings - Calibration Mode to enter the calibration interface
Set the voltage to be detected and click 'Run'
Grasp the trigger of the electrostatic gun, and the voltage will be displayed in real-time in the lower right corner of the calibration interface, with an error of ± 5%