solenoid valveIt is an industrial equipment that uses electromagnetic control and is an automation basic component used to control fluids. It belongs toactuatorAnd pneumatic solenoid valve is one of them, which is controlled byvalve bodyThe movement is used to block or leak different oil discharge holes, and the inlet hole is normally open. Hydraulic oil will enter different oil discharge pipes, and then push the piston of the cylinder through the pressure of the oil in the pneumatic solenoid valve. By controlling the current of the solenoid valve of the pneumatic solenoid valve, the entire solenoid valve is controlledmechanical motion.

Electromagnetic valve is an automation basic component used to control fluids and belongs to actuators; Not limited to hydraulic and pneumatic. Electromagnetic valves are used to control the direction of hydraulic flow, and mechanical devices in factories are generally controlled by hydraulic cylinders, so electromagnetic valves are used.

It can work normally under vacuum, negative pressure, and zero pressure, but the diameter generally does not exceed 25 millimeters.

It can also operate under zero pressure difference, vacuum, and high pressure, but with high power, it must be installed horizontally.

The upper limit of the fluid pressure range is relatively high and can be installed arbitrarily (customized), but it must meet the fluid pressure difference conditions.