-
E-mail
3487366556@qq.com
-
Phone
13867115859
-
Address
Hangzhou Jiayou Industrial Co., Ltd., 6th Floor, Building 11, Zhongnan High tech Qianjiang Yungu Industrial Park, No. 489 Hongtai 6th Road, Xiaoshan Economic and Technological Development Zone, Hangzhou City, Zhejiang Province
Hangzhou Jiayou Industrial Co., Ltd
Printing workshop humidity control solution | Fog King high-pressure micro fog humidifier empowers Kunshan Kewang to reduce costs and increase efficiency
Date: 2025-12-31Read: 3
Printing workshop humidification case
Low humidity in the printing workshop can lead to static electricity and dust, which is not conducive to improving printing quality and efficiency. Paper often experiences wrinkles, deformation, adhesion, and inaccurate overprinting due to water loss, which not only reduces production efficiency but also causes a large amount of material waste. For this purpose, high-voltage micro fog humidifiers can be installed in the printing workshop to quickly humidify and remove static electricity, greatly improving the efficiency and yield of printing operations, reducing costs and increasing efficiency.
As the preferred equipment in the field of humidification in printing workshops, the "Fog King" brand high-pressure micro fog humidifier under Hangzhou Jiayou Industrial Co., Ltd. has recently been applied in the printing workshop of Kunshan Kewang Rapid Printing Co., Ltd. Specifically, our technicians selected equipment according to the workshop area, floor height, initial humidity, target humidity, equipment layout and other working conditions, and determined to configure a 2.2kw high-pressure micro mist humidifier host to drive 120 00 # nozzles in multiple ways for spray humidification, so as to meet the humidity requirements of printing operations and achieve good results in quality improvement and production increase.
Spray humidification
The working principle of the Mist King high-pressure micro mist humidifier is to pressurize the treated water to a set pressure through an industrial grade plunger pump, and then transport it to the nozzle through a high-pressure resistant pipeline to atomize and form fine water mist particles, which evenly cover the low humidity area of the workshop and achieve multiple effects of humidification, cooling, dust removal, and static electricity removal simultaneously. In addition to the printing industry, this equipment is widely used in multiple industries such as textiles, electronics, papermaking, spraying, and photovoltaic curing, accumulating a large number of successful application cases. It has good humidification effect, increased production and quality, reduced costs and increased efficiency.
Wuwang high-pressure micro mist humidifier has multiple advantages: fine water mist particles, uniform spray, high humidification efficiency and low operating cost; Low energy consumption and high water resource utilization during operation; Equipped with intelligent control system, it can automatically start and stop spray through time setting or temperature and humidity sensing, which is easy to operate without special personnel on duty; At the same time, it is equipped with a triple protection mechanism of water shortage and power outage, automatic pressure relief, and overload and phase loss, which can not only extend the service life of the equipment, but also ensure the continuous and stable humidification effect, safeguarding the safety production of enterprises.