-
E-mail
2734988043@qq.com
-
Phone
18601767286
-
Address
Room 517-518, No. 1108 Rongmei Road, Songjiang District, Shanghai
Congfeng Industrial Technology (Shanghai) Co., Ltd
2734988043@qq.com
18601767286
Room 517-518, No. 1108 Rongmei Road, Songjiang District, Shanghai
We represent the entire range of Burkert products and have a large stock available at affordable prices,
If you cannot find a suitable model at the moment, or add (same)
Consultation, we will provide you with a selection and quotation.
burkert6213EV A 20 EPDM VA G3/4
The 6213 EV valve is a servo assisted soleno
S's ID. Electric vehicle series. Spring coupling
Diaphragm support opening process
The valve. In the standard version, valves are
Suitable for liquid use. Zui Low is different from others,
*Opening requires a certain amount of pressure.
A special version (HP00), open
Valves without differential pressure are available
Used for gas and vacuum applications. Various types of crossings
You can use phrase material combinations
Waiting on the application. Standard brass
Housing meets the drinking water needs of all Europeans
requirement. Lead free or dezincifi cation-
There are other wear-resistant brass as well
The market.
burkert6213EV A 20 EPDM VA G3/4
Technical data
Standard DN 10-40mm
HP00:DN13-20
The valve body material is copper ACC. To DIN EN 50930-6, stainless steel 1.4408 (316),
Nickel plated brass (5 µ m)
Internal valve
Body made of brass
Stainless steel valve body
Brass, stainless steel, and PPS
Stainless steel and PPS
Sealing materials NBR, FKM, EPDM
medium
rubber
FKM
EPDM rubber
Neutral liquid, water, hydraulic oil, additive free oil
Each solution, hot oil and additives
Oil and fat free fl uid and gas
The maximum value of environmental temperature. + 55°C
medium temperature
rubber
FKM
EPDM rubber
-10 + 80°C
0 to+90 ° C and polyamide coil with coil epoxy/0-120 ° C
-30+90 ° C polyamide coil
-30+100 ° C epoxy coil
Voltage standard 024/DC, 024/50230/50110/50120/60
HP00:24V(50 - 60hz),230V(50 - 60hz)
Voltage tolerance ± 10%
Work cycle * continuous
Electrical connection label connector ACC. Form A for DIN EN 175301-803
(Previously DIN 43650)
(See the attached ordering diagram, page 7)
IP 65 protection level with cable plug installed
Install as required, perpendicular to the actuator
burkert6213EV A 20 EPDM VA G3/4
Last Article: Burkert00615638 Baode Model 0407 Series
Next Article: What are the precautions for conductivity sensors