A strong magnetic water processor is a strong magnetic unit assembled through magnetic circuit design, which activates water with strong magnetic fields and forms cathodic protection for pipelines to achieve water quality activation, scale prevention, corrosion inhibition, and sterilization and algae removal effects. It has many characteristics such as no use of chemical agents, environmental protection, no pollution, no energy consumption, long service life, no need for dedicated personnel to manage and maintain, and low maintenance costs.

The installation and usage requirements of a strong magnetic water processor are quite difficult for many beginners. Here, Lijin Environmental Protection has summarized some small knowledge about the installation and usage of this device, to popularize for beginners:

　　Precautions for installation of strong magnetic water processor:

1. New equipment or equipment with less severe scaling can be directly installed with a magnetic descaling device.

2. During installation and handling, care should be taken not to subject the host to stress or moisture.

3. Equipment with severe scaling should be cleaned and installed to prevent scaling from blocking pipelines.

4. The power supply voltage is 220V, 50Hz. It is recommended to connect it to the water pump power supply.

5. Non professionals are not allowed to open the main part on their own to prevent electric shock or damage to the circuit.

　　Precautions for the operation of a strong magnetic water processor:

1. The product has been debugged by the technical inspection department before leaving the factory, and users do not need to adjust the host.

2. The red indicator light is the power indicator light, and the green indicator light is the work indicator light. If it appears:

If the red light is on and the green light is not on, immediately shut down and notify the manufacturer for maintenance.

If the red light is not on and the green light is on, it indicates that the operation is normal and the manufacturer can be notified for maintenance while continuing to operate.

3. New and cleaned equipment can be drained once a month, while scaled equipment and systems should be drained once a week until the dirt is removed and can be drained once a month.